How to Put Leading Indicators into Practice

Posted on by Joy Inouye

 

The use of leading indicators is a growing hot topic in occupational and environmental health and safety. The Campbell Institute at the National Safety Council has been studying leading indicators for the past two years to help more organizations take advantage of their predictive power. The Institute defines leading indicators as proactive, preventive, and predictive measures to identify and eliminate risks and hazards in the workplace that can cause incidents and injuries. Consider an indicator as a concept that a company would like to measure, such as “employee engagement.” In contrast, a metric is a way of actually measuring this concept, such as “number of employees leading safety meetings.”

While the Institute’s research described leading indicators, explained their importance and provided specific examples of indicators, many organizations were still unsure about how to start using them.

This became the focus for the most recent stage of research released by the Campbell Institute in a new white paper, Elevating EHS Leading Indicators: From Defining to Designing. The paper describes how eight Campbell Institute members and partners used leading indicators and outlines important lessons learned along the way.

Four common themes and takeaways arose among the Institute participants:

  • Leverage what is already being measured
  • Just get started – don’t spend too much time deliberating
  • Make sure indicators communicate meaningful and actionable information
  • Secure leadership support

Leverage what is already being measured

There’s no need to reinvent the wheel. Take an inventory of all your existing indicators to see what might work well. Schneider Electric started looking at safety training hours because this was already being measured. Don’t be afraid of the “bottom up” approach. The tracking of training hours as a leading indicator was first adopted at individual Schneider Electric sites before being rolled up to corporate.

Just get started

It may seem overwhelming to start a leading indicators program, but even Institute members admit they began with very small programs. Don’t get tied up in trying to find the “perfect” leading indicator, as a universal one doesn’t exist. You really won’t know the true value of an indicator until you give it a chance. Knowing that most leading indicators will have to be adjusted in the future makes it even more practical to just begin somewhere.

Cummins, Inc. started small by tracking health and safety assessments and corrective/preventive actions. The main reason for choosing these two indicators was that these data were readily available at the site level and worksites would not be burdened by gathering additional information.

Track meaningful and actionable information

Leading indicators should provide a clear path forward on how to improve safety. Over time, Schneider Electric realized that merely tracking training hours was not as predictive as it had been at the beginning. They shifted their focus to instead track the effectiveness of training by periodically quizzing employees in the months following the training. They found that retention of training information was more indicative of injuries and near misses.

Secure Leadership Support

Leadership support for leading indicators is crucial. It’s great when the mandate comes from top management, as it was for Johnson Controls and ExxonMobil. However, this isn’t always the case. A couple of participants noted that getting buy-in from different parts of the organization (management, human resources, frontline workers, engineers, etc.) required speaking “different languages” to appeal to their unique needs. Jeff Ruebesam of Fluor states, “Most people understand the concept of identifying and managing risk. Would you rather be chasing incidents or would you rather be proactive about addressing hazards? No matter what function you’re in, you can wrap your head around that.

Differences among the research participants were few, but raise some interesting points for future discussion. Not all participants agree that near misses should be considered leading indicators, or that individual sites should determine their own leading indicators. There is also not consensus that leading indicators should be tied to leadership’s performance evaluations.

Any successful safety management system should have a balance of predictive leading indicators as well as more outcome-based lagging indicators, such as fatality and injury rates. However, the research shows that every organization’s journey is slightly different, and a strategy that works for one may not be relevant to another. The key is to just dive in and find what makes sense for you.

For more details on this paper, and all of the stages of leading indicators research from the Campbell Institute, visit thecampbellinstitute.org/research. You can also register to attend a webinar at no charge on this new research taking place March 10, 2016 at 11:00 a.m. EST.

Additionally, “Occupational Health Indicators” (OHIs) are being used by states with NIOSH-sponsored occupational safety and health surveillance programs, as well as other states  to evaluate their state’s occupational health status and needs. OHIs are measures of health (work-related disease or injury) or factors associated with health (workplace exposures, hazards, or interventions). OHIs give states the opportunity to evaluate trends over time and the effectiveness of prevention activities and interventions. More information is available from Council of State and Territorial Epidemiologists, Occupational Health Indicators  and Indicators for Occupational Health Surveillance, MMWR Recommendations and Reports .

 

Joy Inouye is a Research Associate at the Campbell Institute of the National Safety Council.

Posted on by Joy Inouye

12 comments on “How to Put Leading Indicators into Practice”

Comments listed below are posted by individuals not associated with CDC, unless otherwise stated. These comments do not represent the official views of CDC, and CDC does not guarantee that any information posted by individuals on this site is correct, and disclaims any liability for any loss or damage resulting from reliance on any such information. Read more about our comment policy ».

    I appreciate this article and feel that much of the roll-out suggested is generalizable across other types of cultural shifts. I especially want to underscore the part that examines not just training hours, but rather that follows up on those training hours by testing employees over time and measuring the relationship between retention and accident reduction. As these trainings occur, incorporating certain simple exercises, such as requiring employees to summarize their new learning, explain it, and put it in-context with what they already know, will serve to enhance retention and employee buy-in. (See “Make it Stick: the Science of Successful Learning” ) Thanks for the excellent reminders, and for contributing to public awareness of the valuable work being done at the Campbell Institute.

Post a Comment

Leave a Reply to Info Ecommerce Cancel Reply

Your email address will not be published. Required fields are marked *

All comments posted become a part of the public domain, and users are responsible for their comments. This is a moderated site and your comments will be reviewed before they are posted. Read more about our comment policy »

Page last reviewed: July 22, 2016
Page last updated: July 22, 2016